MIRZASTO

-Thoroughly clean the application surface, removing any dirt, stains, peeling paint, and dust.

-Address any unevenness on the surface by using San Deco Acrylic Putty Interior to achieve a smooth and even base.

-Apply a coat of San Deco Decoprimer as a primer to prepare the surface for the decorative coating. This step is essential to ensure good adhesion and a consistent finish.

-Thoroughly mix Mirzasto until it reaches a homogeneous consistency, without the need for thinning.

-Apply Mirzasto to a 1-2 m² area using a steel trowel. Then, create the desired decorative effect by applying the product with either a plastic or a steel spud in irregular patterns. Before Mirzasto dries, you can create smooth and striped patterns using a steel or plastic spud.

-After waiting for 4 hours at a temperature of 23°C (220/260), use a grained sanding paper to remove any irregularities or bumps.

-To complete the process, apply the colored Effect Finish coats one after the other, following the color catalogue. Wait for 3 hours between each coat of Effect Finish.

-Ensure that the application environment temperature is maintained between +5°C and +35°C during the application and for 24 hours afterward for best results.

Under standard 23°C environmental conditions, allow 4-5 hours for touch dry and 24 hours for complete drying.

Depending on the surface smoothness, its porosity and the application methods, for a single coat application:

  • 1 lt covers 4,0 – 5,0 m² of surface
  • 1 kg covers 2,3 – 2,9 m² of surface
  • The paint consumption for 1 m² area is 200–250 ml and 350–450 grams (gr).

TDS

TDS

SDS

Intense Consistency Decorative Coating with
Metallic and Nacreous Shadow Effects

 

APPLICATION

Mirzasto is applied to interior walls, plaster, exposed concrete, and wooden surfaces following surface preparation with an appropriate primer and is typically used in conjunction with the final coat product, Effect Finish.

FEATURES

– It can be applied easily as it has special fillings inside.

– The pattern and sanding can be done easily.

– Due its high vapor permeability, it allows surface to discharge the steam and breathe.

– On Mirzasto application, there should not be any problem of early drying as the product features don’t allow this.

– As it is water-based, it is harmless to human health and environment.

COLORS

Mirzasto is a paste-like decorative coating based on acrylic emulsion, designed for easy application and effortless patterning.

All Colors