After thoroughly cleaning the application area to remove dust, dirt, oil, and any swollen paint, surface irregularities should be addressed using San Deco Acrylic Putty Interior. Subsequently, the surface should be primed with San Deco Decoprimer.

-Start by thoroughly mixing Marmorosso Marmorino until you achieve a consistent texture.

-Apply the first layer of Marmorosso Marmorino onto the surface. Ensure an even and uniform coverage.

-Depending on environmental conditions and the desired effect, apply a second layer of Marmorosso Marmorino.

-Address any wetness on the surface by using appropriate techniques to achieve a homogeneous appearance.

-Polish the product with a tool suitable for the desired finish. The degree of polishing will affect the final appearance.

-Keep in mind that Marmorosso Marmorino, being natural lime-based, may lighten in color by 4-5 tones after complete drying.

-Consider applying a protective coating like San Deco Shield (matte or glossy) if using the product in humid environments or where temperature and humidity levels are high.

Environmental Conditions: Ensure that the temperature of the environment remains within the range of +5°C to +35°C during both the application and the 24 hours following it.

Allow 6-8 hours for the product to reach the touch-dry stage and 24-48 hours for it to completely dry under an environment temperature of 23°C.

For a two-layer application, the coverage will vary depending on the surface smoothness, porosity, and the chosen application method:

Smooth Application for Two Layers:

  • 1 liter covers 1.00 – 1.30 m² of surface.
  • 1 kilogram covers 0.65 – 0.85 m² of surface.
  • The paint consumption for 1m² area is 765-1015 milliliters and 1200-1600 grams.

Textured Application for Two Layers:

  • 1 liter covers 0.65 – 0.85 m² of surface.
  • 1 kilogram covers 0.40 – 0.50 m² of surface.
  • The paint consumption for 1m² area is 1275-1590 milliliters and 2000-2500 grams.



Venetian Plaster with Antique Marble and Natural Stone Effect

Marmorosso Marmorino is a natural mineral-based decorative coating with the appearance of antique marble, made from lime and suitable for interior use.


It adds depth and character to a wide range of indoor surfaces, including walls, plaster, exposed concrete, and wooden surfaces. This enhancement is achieved through meticulous surface preparation with a suitable plaster and subsequent topcoat finishing.



-Has an easy application.

-Can be applied in both plain and textured finishes with 2 coats.

-Excellent water permeability, allowing the surface to breathe.

-Natural lime content provides resistance against bacteria and mold.

-Water-based formulation for environmental friendliness.