After thoroughly removing any dirt, grease, blistered paint, and dust from the application surface, proceed to rectify surface defects using San Deco Acrylic Putty Interior, followed by an application of San Deco Decoprimer as an undercoat.

-Atracto should be thoroughly mixed to achieve homogeneity, without any dilution.

-For the first coat, apply Atracto a steel trowel or brush.

-The second coat can also be applied with a trowel or brush, allowing you to achieve the desired effect.

-Allow a minimum of 6 hours between each coat for proper drying.

-Ensure that the application environment remains within the temperature range of +5°C to +35°C during and within the 24 hours following the application.

Allow a period of 2-3 hours for the paint to become touch dry, and a full 24 hours for it to completely dry under standard environmental conditions at 23°C.

The coverage of the paint depends on factors such as surface smoothness, porosity, and the chosen application methods for a single coat:

For Atracto:

  • 1 liter covers an area ranging from 8.0 to 12.5 m².
  • 1 kilogram covers an area spanning from 6.5 to 10.0 m².
  • The paint consumption per 1m² area varies between 80-125 milliliters (ml) and 100-150 grams (gr).

For Atracto Touch:

  • 1 liter provides coverage for an area between 8.5 and 13 m².
  • 1 kilogram is sufficient for an area of 7 to 11 m².
  • The paint consumption for 1m² area falls within the range of 76-118 milliliters (ml) and 90-140 grams (gr).

Luxurious Silken Texture and Mesmerizing Metallic Pearl Finish Decorative Coating

Atracto stands out as an acrylic emulsion-based decorative coating, renowned for its opulent silken texture and captivating pearlescent silver and gold finish.


Atracto is a versatile solution suitable for adorning various interior surfaces, including walls, plaster coatings, rugged concrete, and wooden substrates, when used in combination with the suitable primer, following proper surface preparation.

Atracto offers a radiant decorative look through the inclusion of metallic pigments, adding a luminous touch to surfaces.

The vivid and brilliant pigments bestow a delightful gleam on the surface, enhancing its visual appeal.

Atracto’s exceptional water vapor permeability promotes the elimination of moisture, allowing the surface to breathe and remain in good condition.

Atracto is water-based, ensuring it is safe for both human health and the environment, making it an eco-friendly choice.

A notable feature of Atracto is its perfumed quality, creating a pleasant fragrance in the application environment for an enhanced experience.”