TRAVERTINO
-After removing all kinds of dirt, grease, bloated paint, and dust from the surfaces where Travertino will be applied.
-The surface defects should be corrected with San Deco Acrylic Putty Interior.
-Lastly,should be undercoated with San Deco Decoprimer.
-Travertino is applied without dilution using a stainless steel trowel, ensuring that the first layer has a minimum thickness of 1mm.
-Wait for a minimum of 6 hours before applying the second layer.
-Before it thoroughly dries, you can achieve the desired effect on the surface using a special sponge.
-For a proper finish, the surface should be polished with a steel trowel.
-Maintain the temperature of the application environment between +5°C and +35°C during application and for 24 hours afterward.
Allow 2-3 hours for touch dry and 48 hours for complete dry at +23°C environment conditions.
Depending on the surface’s smoothness, porosity, and the chosen application method, the coverage for a single coat is as follows:
- 1 liter can cover an area of 1.75 to 2.35 m².
- 1 kilogram can cover around 1.00 to 1.35 m².
- You’ll typically use 425-570 milliliters or 750-1000 grams per m².
TDS
TDS
Travertino is a natural mineral-based decorative interior coating that creates the appearance of travertine on the applied surface.
FEATURES
-Travertino enables the generation of diverse patterns and effects during application, contingent on the skills of the applicator.
-Its elevated vapor permeability aids in the efficient release of steam, enabling the surface to breathe.
-As a water-based product, it poses no harm to human health or the environment.
-It enriches the application environment with a pleasing fragrance, courtesy of its perfumed feature.