NOSTALGIE
-Clean the surfaces to be coated, removing any dirt, oil, swollen paint, and dust.
-Correct surface defects using San Deco Acrylic Putty Interior.
-Apply a primer coat using San Deco Decoprimer.
Application Instructions:
-Before application, thoroughly mix Nostalgie without thinning.
-Apply Nostalgie irregularly onto the surface using a plastic or steel trowel, depending on the desired effect.
-After two days of applying Nostalgie, sand the surface with sandpaper.
-Apply Nostalgie Finish to the surface using circular movements, utilizing the special cloth or gloves provided.
Environmental Conditions:
-Ensure that the application environment maintains a temperature between +5°C and +35°C during the application and for 24 hours afterward.
Allow 6-8 hours for touch dry and 48 hours for complete dry at 23oC environment conditions.
For a single coat application, the coverage is as follows:
- 1 liter covers 1.0 – 1.5 m² of surface.
- 1 kilogram covers 0.8 – 1.0 m² of surface.
- The paint consumption for 1m² is approximately 650-1000 ml or 1000-1175 grams (gr).
TDS
TDS
SDS
SDS
Decorative Coating Combined with Antique Stone Effect
FEATURES
-Nostalgie possesses a soft composition that facilitates the formation of desired patterns on the surface.
-When combined with the Nostalgie Finish product, it imparts an antique effect to the surface.
-It delivers a velvety texture.
-Due to its outstanding water vapor permeability, it promotes steam expulsion, allowing the surface to breathe.
-Being water-based, it is environmentally friendly and poses no harm to human health.
-It elevates the ambiance of application environments with a pleasing fragrance, courtesy of its perfumed feature.