Travertino
Travertino can be utilized on interior walls, plaster, exposed concrete, and wooden surfaces. When applying, it is recommended to use it alongside a suitable primer following surface preparation.
FEATURES
Travertino is a mineral-based decorative interior wall coating that creates the natural look of travertine stone on the applied surface. It allows for various textures and effects through different application techniques.
SURFACE PREPARATION
- After removing all kinds of dirt, grease, bloated paint, and dust from the surfaces where Travertino will be applied.
- The surface defects should be corrected with San Deco Acrylic Putty Interior.
- Lastly,should be undercoated with San Deco Decoprimer.
APPLICATION INSTRUCTIONS
- Travertino is applied without dilution using a stainless steel trowel, ensuring that the first layer has a minimum thickness of 1mm.
- Wait for a minimum of 6 hours before applying the second layer.
- Before it thoroughly dries, you can achieve the desired effect on the surface using a special sponge.
- For a proper finish, the surface should be polished with a steel trowel.
- Maintain the temperature of the application environment between +5°C and +35°C during application and for 24 hours afterward.
DRYING TIME
Allow 2-3 hours for touch dry and 48 hours for complete dry at +23°C environment conditions.
THEORETICAL CONSUMPTION
Depending on the surface’s smoothness, porosity, and the chosen application method, the coverage for a single coat is as follows:
- 1 liter can cover an area of 1.75 to 2.35 m².
- 1 kilogram can cover around 1.00 to 1.35 m².
- You’ll typically use 425-570 milliliters or 750-1000 grams per m².