Moire

• Thanks to its special components, Moire provides a natural suede appearance to the applied surface. With its matte finish and unique texture, it creates distinctive interior spaces. The special components in its formula give the surface a soft matte effect.
• It is used on interior walls, plaster, exposed concrete, and wooden surfaces, after proper surface preparation and with its dedicated primer.
• It is water-based.
• It is environmentally friendly and harmless to human health.

• After cleaning the surfaces to be painted from any dirt, oil, peeling paints, and dust, surface imperfections should be corrected using San Deco Acrylic Putty Interior followed by priming with San Deco Decoprimer.

• Moire is applied in two coats using a brush.
• Moire should be mixed homogeneously without diluting. The same procedure should be followed for both coats during application.
• Wait 3-4 hours between each coat.
• In the first coat, Moire is applied freely using a brush to achieve the desired appearance.
• Repeat the same application technique in the second coat.
• You can create your application methods that suit your style.
• NOTE: In cases where more than one batch is used in the same project, it is recommended that the batches be mixed in equal proportions to prevent batch-based differences.

At 23°C the touch-drying time is 1-2 hours, and the complete drying time is 24 hours.

For single-layer applications depending on surface smoothness, absorbency, and application techniques;

• 1 liter covers an area of 8 – 12 m²,
• 1 kilogram covers an area of 7 – 10 m²
• Paint consumption per 1 m² is 80-130 ml and 100-150 gr.