Amarsis

• Galaxy provides gold and silver reflections to the applied surface.
• It has no damage for human health or environment as it is water based.

• Begin by thoroughly cleaning the application surface to remove any dirt, grease, blistered paint, and dust.
• Correct any surface defects using San Deco Acrylic Putty Interior.
• Apply an undercoat using San Deco Amarsis Primer after surface preparation.

Brush Application:

• Slowly and gently mix the ready-to-use Amarsis with a spatula without thinning it. Avoid using -mechanical devices during mixing.
• Apply a single coat with a special brush.
• After 25 minutes, use a stainless steel trowel to smooth the decorated surface.
• Apply a second coat of Amarsis after 4-5 hours at 23°C using a brush.
• One hour later, use the stainless steel trowel to apply pressure on the surface, crushing the color particles to create light and dark shades.

Trowel Application:

• Apply Amarsis to the surface with a steel trowel as a single coat.
• After 4-5 hours at 23°C, apply a second coat of Amarsis using the same trowel technique.
• One hour later, use a stainless steel trowel to apply pressure on the surface, crushing the color particles to create light and dark shades.
• Ensure that the application environment maintains a temperature between +5°C and +35°C for 24 hours during and after the application.

Allow 4-5 hours for touch dry and 24-48 hours for complete dry at 23oC environment conditions.

For a single coat application, the coverage of the paint varies depending on surface smoothness, porosity, and the chosen application methods:

• 1 liter covers an area ranging from 7.5 to 9 m².
• 1 kilogram provides coverage for an area spanning from 7.5 to 9 m².
• The paint consumption per 1m² area falls within the range of 110-130 milliliters (ml) and 110-130 grams (gr).