Alfroya

With its pure acrylic emulsion and reflective pearlescent pigments, Alfroya creates silky matte, shimmering, and aesthetic surfaces in interior spaces.
It is used on interior walls, plaster, exposed concrete, and wooden surfaces with proper surface preparation and its dedicated primer.
It is water-based.
It is harmless to human health and the environment.

After cleaning the surfaces to be painted from any dirt, oil, peeling paints, and dust, surface imperfections should be corrected using San Deco Acrylic Putty Interior, followed by priming with San Deco Decoprimer.

Alfroya is applied in two coats.
It should be mixed homogeneously without diluting.
In the first coat application, apply Alfroya using a trowel.
After the appropriate drying time, apply the second coat with a trowel again, and use the trowel to create patterns according to the desired effect.
Different kinds of brushes can also be used to create different textures and patterns.
Wait a minimum of 5-6 hours between coats.
In cases where more than one batch is used in the same project, it is recommended that the batches be mixed in equal proportions to prevent batch-based differences

At 23°C and 50% humidity, the touch-drying time is 5-6 hours, and the complete drying time is 24 hours.

For single-layer applications depending on surface smoothness, absorbency, and application techniques;