Beton Deco

• It creates a lifelike concrete effect on surfaces.
• It demonstrates high resistance to alkali, preventing swelling or cracking.
• Effectively blocking external water penetration, it allows buildings to breathe by enabling moisture to escape from within.
• As a water-based product, it is environmentally friendly and poses no harm to human health.
• Moreover, its perfumed composition enhances the application environment with a delightful aroma.

• Remove any dirt, oil, peeling paint, and dust from the surface.
• Correct any surface imperfections using San Deco Acrylic Putty Interior.
• Begin by applying San Deco Primer to the surfaces. It’s recommended to use a primer of the same color as the selected product color for optimal results.

• Mix Beton Deco thoroughly until it becomes homogeneous. If needed, you can add clean water to achieve the desired application viscosity.
• Once the undercoat is completely dry, apply the first coat of Beton Deco evenly to the surface using a trowel.
• After approximately 5-6 hours at a temperature of 23°C, apply the second coat in the same manner, using a steel trowel. You can then smooth the surface with the trowel.
• Different patterns and thicknesses can be achieved with Beton Deco by using various trowel techniques for a unique finish.
• Maintain an environment temperature between +5°C to +35°C for 24 hours during and after the application for optimal results.

Allow 5-6 hours for the surface to become touch dry for complete drying, it may take 24-48 hours under normal environmental conditions with a temperature of 23°C.

Depending on the surface smoothness, its porosity and the application methods, for a single coat application:

• 1 lt covers 2,25 – 2,85 m² of surface.
• 1 kg covers 1,35 – 1,65 m² of surface.
• The paint consumption for 1m² area is 350–440 ml and 600–750 grams (gr).