Nostalgie
Nostalgie is a decorative interior coating based on acrylic emulsion and reinforced with fibers.
Nostalgie is administered onto interior building surfaces, including walls, plaster, exposed concrete, and wooden areas, following appropriate surface preparation with a compatible primer.
FEATURES
- Nostalgie possesses a soft composition that facilitates the formation of desired patterns on the surface.
- When combined with the Nostalgie Finish product, it imparts an antique effect to the surface.
- It delivers a velvety texture.
- Due to its outstanding water vapor permeability, it promotes steam expulsion, allowing the surface to breathe.
- Being water-based, it is environmentally friendly and poses no harm to human health.
- It elevates the ambiance of application environments with a pleasing fragrance, courtesy of its perfumed feature.
SURFACE PREPARATION
- Clean the surfaces to be coated, removing any dirt, oil, swollen paint, and dust.
- Correct surface defects using San Deco Acrylic Putty Interior.
- Apply a primer coat using San Deco Decoprimer.
APPLICATION INSTRUCTIONS
- Before application, thoroughly mix Nostalgie without thinning.
- Apply Nostalgie irregularly onto the surface using a plastic or steel trowel, depending on the desired effect.
- After two days of applying Nostalgie, sand the surface with sandpaper.
- Apply Nostalgie Finish to the surface using circular movements, utilizing the special cloth or gloves provided.
Environmental Conditions:
- Ensure that the application environment maintains a temperature between +5°C and +35°C during the application and for 24 hours afterward.
DRYING TIME
Allow 6-8 hours for touch dry and 48 hours for complete dry at 23oC environment conditions.
THEORETICAL CONSUMPTION
For a single coat application, the coverage is as follows:
- 1 liter covers 1.0 – 1.5 m² of surface.
- 1 kilogram covers 0.8 – 1.0 m² of surface.
- The paint consumption for 1m² is approximately 650-1000 ml or 1000-1175 grams (gr).