Obiante

Easy to apply.
Boasts outstanding filling capacity, requiring only a single coat.
Exhibits excellent water permeability, allowing the product to breathe.
Its inherent natural lime content provides inherent resistance to bacteria and mold.
Formulated as a water-based solution.

Begin by thoroughly cleaning the area to remove any dust, dirt, oil, or peeling paint.
Address any surface irregularities by using San Deco Acrylic Putty Interior to achieve a smooth surface.
Apply a coat of San Deco Decoprimer to prime the surface before proceeding with the decorative coating. It’s important to ensure proper adhesion and an even finish.

Before application, soften Obiante by mixing it with a steel trowel without diluting.
Apply Obiante to the surface as a single coat, adjusting the thickness according to your desired result, using a steel trowel.
While the product is still wet, create various designs using a special tool.
Approximately 20 minutes later at 23±2˚C, when the product begins to settle, finish the surface by smoothing it with a steel trowel. For improved smoothness and brightness, wet the surface of the Obiante product and then thoroughly smooth it with a trowel. Allow it to dry.
Once Obiante has completely dried, apply the Pearlescent Decorative Finish in one or more desired colors to finish the process.
Maintain an application environment temperature between +5°C and +35°C during application and for 24 hours afterward to achieve the best results.

Under 23°C environmental conditions, allow 5-6 hours for touch dry and 24 hours for complete drying.

Depending on surface smoothness, porosity and application methods, for a single coat application;