Galaxy

• Galaxy is a decorative material designed for indoor use.
• It creates a remarkable old wall effect with its distinctive granular structure.
• Thanks to its transparent film, the color of the applied surface remains unchanged.
• Galaxy exhibits resistance to rough and prolonged abrasion, as well as mild chemicals.
• Being water-based, it has no harm to human health or the environment.
• Galaxy enhances the ambiance of application environments with a pleasant fragrance through its perfumed feature.

• Start by thoroughly cleaning the application surface to remove any dirt, grease, blistered paint, and dust.
• Correct any surface defects using San Deco Acrylic Putty Interior.
• Apply an undercoat of San Deco Decoprimer by diluting it with 20-25% fresh water.
• Use a brush or roller to apply two layers of Decoprimer, allowing each layer to dry thoroughly.

• After the primer has dried, thoroughly mix Galaxy with a spatula.
• Apply Galaxy to the surface using a special brush.
• Wait for approximately 25 minutes.
• Achieve various decorative effects by giving the final appearance to the surface using a plastic spatula.
• Ensure that the temperature in the application environment remains within the range of +5°C to +35°C during the application and for 24 hours afterward.

Allow 4-5 hours for touch dry and 24-48 hours for complete dry at 23oC environment conditions.

For a single coat application, the coverage of the paint varies depending on surface smoothness, porosity, and the chosen application methods:

• 1 liter covers an area ranging from 6.5 to 8.0 m².
• 1 kilogram provides coverage for an area spanning from 6.0 to 7.5 m².
• The paint consumption per 1m² area falls within the range of 125-150 milliliters (ml) and 130-165 grams (gr).