OBIANTE
-Begin by thoroughly cleaning the area to remove any dust, dirt, oil, or peeling paint.
-Address any surface irregularities by using San Deco Acrylic Putty Interior to achieve a smooth surface.
-Apply a coat of San Deco Decoprimer to prime the surface before proceeding with the decorative coating. It’s important to ensure proper adhesion and an even finish.
-Before application, soften Obiante by mixing it with a steel trowel without diluting.
-Apply Obiante to the surface as a single coat, adjusting the thickness according to your desired result, using a steel trowel.
-While the product is still wet, create various designs using a special tool.
-Approximately 20 minutes later at 23±2˚C, when the product begins to settle, finish the surface by smoothing it with a steel trowel. For improved smoothness and brightness, wet the surface of the Obiante product and then thoroughly smooth it with a trowel. Allow it to dry.
-Once Obiante has completely dried, apply the Pearlescent Decorative Finish in one or more desired colors to finish the process.
-Maintain an application environment temperature between +5°C and +35°C during application and for 24 hours afterward to achieve the best results.
Under 23°C environmental conditions, allow 5-6 hours for touch dry and 24 hours for complete drying.
Depending on surface smoothness, porosity and application methods, for a single coat application;
- 1 lt covers 1,05 – 1,40 m² of surface.
- 1 kg covers 0,65 – 0,85 m² of surface.
- The paint consumption for 1m²area is 715–950 ml and 1200–1600 grams (gr).
Natural Lime-Based and Mineral-Added Decorative Coating
FEATURES
-Easy to apply.
-Boasts outstanding filling capacity, requiring only a single coat.
-Exhibits excellent water permeability, allowing the product to breathe.
-Its inherent natural lime content provides inherent resistance to bacteria and mold.
-Formulated as a water-based solution.